cepac Controlled Environment Packaging

Page 1 | Page 2


BluGuard Anti-Corrosion Barrier Lamination;
featuring Cortec VpCI-126 film sealant layer and the ultra-tough VALERON
cross-laminated film from Valeron Strength Films.

PACKAGING AND STORAGE
Store in a cool, dry place until ready for use. To obtain optimum performance from roll stock or converted items it is best to leave the BluGuard product wrapped as it was received.
AVAILABLE CONFIGURATIONS:
  • Pouches
  • Bags
  • Covers
  • Pouches
  • Liners
  • Single Wound Roll Stock
  • Edge-Sealed V-Sheeting on     rolls
  • Large Blankets

  • Property Test Method Value
    Basis Weight, lb/ream ASTM D646 138.8
    Yield, in² /lb Calculated 3100
    Caliper, mils ASTM D2103 8.7
    Tensile strength, psi ASTM D882 3900(MD) 3100(TD)
    Puncture resistance, lb FED STD 101 19.5
    Elmendorf tear, g ASTM D1922 750(MD)   1100(TD)
    Heatseal Strength lb/in width (375° F, 40 psi, 2.0 sec. dwell) ASTM F88 15 - 20
    Water Vapor Transmission rate, g/100 in² * 24 hours (100° F, 90% RH) ASTM 1249 <0.001
    Oxygen Transmission rate, cc / 100 in² * 24 hours (73° F, 0% RH) ASTM D3985 <0.001
    NOTE:These values are typical for this structure and should not be construed as
    performance specifications.

    LIMITED WARRANTY
    All statements, technical information and recommendations contained herein are based upon test that Controlled Environment Packaging, Inc. believes to be reliable, but the accuracy or completeness thereof is not guaranteed.
    CEPI warrants that its products will be free from defects when shipped to customer. CEPI’s obligation under this warranty shall be limited to replacements of product that proves to be defective. To obtain replacement product under this warranty, the customer must notify CEPI, in writing, of the claimed defect within three months after the shipment of the product to customer. All freight charges for replacement products shall be paid by the customer.
    CEPI, having no control over the use of its products, shall have no liability for any injury, loss or damage arising out of the use of or the inability to use its products.
    BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS INTENDED USE AND USER ASSUMES ALL RISK AND LIABILITY WHATSOEVER IN CONNECTION THEREWITH. No representation or recommendation not contained herein shall have any force or effect unless in a written document signed by an officer of CEPI.
    THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OR MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO CASE SHALL CEPI BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
    FOR INDUSTRIAL USE ONLY
    KEEP OUT OF REACH OF CHILDREN
    KEEP PACKAGING MATERIAL INTACT
    NOT FOR INTERNAL CONSUMPTION
    CONSULT MATERIAL SAFETY DATA
    SHEET FOR MORE INFORMATION

    Return to cepac® Roll Stock

    HOME      PRODUCTS      PHOTO GALLERY      CUSTOMERS      GLOSSARY      CONTACT      SITE-MAP
    Copyright ®2004 Controlled Environment Packaging, Inc. All rights reserved.
    Website Designed by Red Eye Development
    Translation by Spanish Translating Services

    More Reading:

    www.schroedershoes.com www.kamanshoes.com www.pelesshoes.com www.gallinarishoes.com www.bargnanishoes.com www.belinellishoes.com www.aminushoes.com